![IMG_E0384[1].JPG](https://images.squarespace-cdn.com/content/v1/652150242aeae46a5b6b94fb/1718082172334-6K7WUPS57MAVLRCT40CL/IMG_E0384%5B1%5D.JPG)
BT30 Tooling Shelf - Omniwall Compatible
Tooling storage and overall organization is always a concern for any productive shop seeking to maximize their process efficiency. There are plenty of similar offerings on the market, but some of the main design concerns we were attempting to improve upon include the following:
1) Cost effectiveness:
Tooling storage can get expensive. We sought to keep the design as simple as possible while providing for a solution that was both attractive and extremely durable.
2) Storage density and accessibility:
Nobody wants to waste space, but nobody wants clutter either. Our shelf is designed to store (7) BT30 tools per shelf within a 16” width footprint and only 5” protrusion from the wall when mounted to an Omniwall Panel. The angled configuration of it means that you don’t have to space the shelves out to provide longer tools with enough clearance to remove or replace them from the shelf. 3D printed hole liners snap into place and protect the taper of the toolholders.
3) Modularity
Our tooling shelf is designed for compatibility with the popular Omniwall modular wall panels which can be purchased in a variety of sizes and are expandable to add as much wall coverage as desired. Within a single 16”x32” wall panel, you can comfortably store up to 35 tools.
What’s included:
Qty (1) tooling shelf, made from 0.070” thick 304 Stainless Steel. Laser cut and bent
Qty (7) 3D-printed hole liners
Qty (4) Omniwall Clips, used to rigidly secure the shelf to the wall panel. In our testing, only (2) were required to provide sufficient support for the shelf even when fully loaded.
*Omniwall panel and wall mounting cleats are not included
Tooling storage and overall organization is always a concern for any productive shop seeking to maximize their process efficiency. There are plenty of similar offerings on the market, but some of the main design concerns we were attempting to improve upon include the following:
1) Cost effectiveness:
Tooling storage can get expensive. We sought to keep the design as simple as possible while providing for a solution that was both attractive and extremely durable.
2) Storage density and accessibility:
Nobody wants to waste space, but nobody wants clutter either. Our shelf is designed to store (7) BT30 tools per shelf within a 16” width footprint and only 5” protrusion from the wall when mounted to an Omniwall Panel. The angled configuration of it means that you don’t have to space the shelves out to provide longer tools with enough clearance to remove or replace them from the shelf. 3D printed hole liners snap into place and protect the taper of the toolholders.
3) Modularity
Our tooling shelf is designed for compatibility with the popular Omniwall modular wall panels which can be purchased in a variety of sizes and are expandable to add as much wall coverage as desired. Within a single 16”x32” wall panel, you can comfortably store up to 35 tools.
What’s included:
Qty (1) tooling shelf, made from 0.070” thick 304 Stainless Steel. Laser cut and bent
Qty (7) 3D-printed hole liners
Qty (4) Omniwall Clips, used to rigidly secure the shelf to the wall panel. In our testing, only (2) were required to provide sufficient support for the shelf even when fully loaded.
*Omniwall panel and wall mounting cleats are not included
Tooling storage and overall organization is always a concern for any productive shop seeking to maximize their process efficiency. There are plenty of similar offerings on the market, but some of the main design concerns we were attempting to improve upon include the following:
1) Cost effectiveness:
Tooling storage can get expensive. We sought to keep the design as simple as possible while providing for a solution that was both attractive and extremely durable.
2) Storage density and accessibility:
Nobody wants to waste space, but nobody wants clutter either. Our shelf is designed to store (7) BT30 tools per shelf within a 16” width footprint and only 5” protrusion from the wall when mounted to an Omniwall Panel. The angled configuration of it means that you don’t have to space the shelves out to provide longer tools with enough clearance to remove or replace them from the shelf. 3D printed hole liners snap into place and protect the taper of the toolholders.
3) Modularity
Our tooling shelf is designed for compatibility with the popular Omniwall modular wall panels which can be purchased in a variety of sizes and are expandable to add as much wall coverage as desired. Within a single 16”x32” wall panel, you can comfortably store up to 35 tools.
What’s included:
Qty (1) tooling shelf, made from 0.070” thick 304 Stainless Steel. Laser cut and bent
Qty (7) 3D-printed hole liners
Qty (4) Omniwall Clips, used to rigidly secure the shelf to the wall panel. In our testing, only (2) were required to provide sufficient support for the shelf even when fully loaded.
*Omniwall panel and wall mounting cleats are not included